The Emergency Plug is simply plugged into the charging socket of the car and simulates a charging process. At this moment, all electric cars switch the driving gear to "P" and apply the electric parking brake. The car is immediatelystopped and the rescue forces can work safely! The Emergency. Plug shows the status via LEDs, so you can see immediately...
Fire-fighting boots with chainsaw protection Class 2 Fal Seguridad VOLCANO BOA C made of PBI fabric represent a turning point in firefighter safety footwear. 30% lighter-than-standard leather boots provide firefighters with a more comfortable, safe and, above all, lighter protective footwear. The Crosstech sock-shaped membrane, however, gives us a...
Fire-fighting boots with chainsaw protection Class 2 Fal Seguridad VOLCANO C made of PBI fabric represent a turning point in firefighter safety footwear. 30% lighter-than-standard leather boots provide firefighters with a more comfortable, safe and, above all, lighter protective footwear. The Crosstech sock-shaped membrane, however, gives us a waterproof...
Rope clamp that can easily be attached to the chest and ventral connector. It is easy to install for ascending ropes.Compatible with harnesses: FS243, FS227, FS2010.
Right hand rope clamp with and ergonomic plastic handle that prevents hand slipping and an anti-jamming release system that is activated at the slightest down ward movement. It can be used with ropes from 8 to 13mm.
FALL SAFE® FS33320 is a light, all-in-one fall arrester, rope adjuster or rope tool. It can be manually stopped on the rope. It’s easy to carry and work and has a maximum rated load of 100Kg.
Provides more comfort when suspended from the harness. Use with our Fall arrest or Work positioning harnesses with ventral attachment. Manufactured with zipper that allows removing the rigid component for easier.
In acc. with DIN 14800-4:2005-02. In Alubox in acc. with DIN 14880-1-LM (600 x 400 x 220 mm) with Schornsteinwerkzeug" lettering with individual lettering on request.
In acc. with DIN 14800-4:2005-02. In Alubox in acc. with DIN 14880-1-LM (600 x 400 x 220 mm) with Schornsteinwerkzeug" lettering with individual lettering on request.
In acc. with DIN 14800-9:2005-02. In Firebox® made by Zarges in acc. with DIN 14880-3-LM (600 x 400 x 150 mm) with aluminium dividers and "Werkzeugsatz Holz" lettering with individual lettering on request.
Tool set "hand tool" according to DIN 14881: 2013-12. In FireBox made by Zarges according to DIN 14880, size 3, with aluminum division and the inscription "hand tool".
The new Biel tool from Paratech offers the user a multitude of possible uses and combinations and has been significantly improved in many ways compared to the previous model.
The standard DIN 14851 was adapted in 2011 to the state of the art. The old version dates back to 1988. The new tear hook is now lighter and easier to load in the vehicle. The total length of the tear hook with telescopic handle is 2.0 meters when pushed together.
The SOS Rescue Tool Kit is a multifunctional tool set that, with a total weight of just 2.9 kg, combines twelve different tools in a handy and stable set.
The complete Paratech tool kit for the first attack. The sturdy nylon bag contains everything necessary to give emergency personnel access and access even in the most difficult situations.
Water distributors are used to distribute water among different users or fire brigade squads. Three-part water distributors allow the division of water into three groups.
Water distributors are used to distribute water among different users or fire brigade squads. Three-part water distributors allow the division of water into three groups.
Water distributors are used to distribute water among different users or fire brigade squads. Two-part water distributors allow the division of water into two groups.
Water distributors are used to distribute water among different users or fire brigade squads. Two-part water distributors allow the division of water into two groups.
Suction strainer with non-return valve is made of high-quality aluminum, which is surface-treated. The introduction of larger parts into the suction basket is prevented by a stainless steel mesh.
Foam inductor. The application rate can be selected by a regulator valve between 0-6%. Foam inlet via Storz D adaptor on the top of the horizontal unit. Control knob for mixing rate at the side of the unit.
Professional high quality reflective FireRescue Paramedic vest for paramedics, first responders, security, public workers and much more so that everyone is visible, comfortable and safe.
Fire protection ball is the simples the most effective automatic firefighting equipment, which can reduce the risk of fire as well resulting fire effectively resist at the same time.
Fal Seguridad VOLCANO fire boots made of PBI fabric represent a turning point in firefighter safety footwear. 30% lighter-than-standard leather boots provide firefighters with a more comfortable, safe and, above all, lighter protective footwear. The Crosstech sock-shaped membrane, however, gives us a waterproof boot with excellent breathability. Top...
Fal Seguridad VOLCANO fire boots made of PBI fabric represent a turning point in firefighter safety footwear. 30% lighter-than-standard leather boots provide firefighters with a more comfortable, safe and, above all, lighter protective footwear. The Crosstech sock-shaped membrane, however, gives us a waterproof boot with excellent breathability. Top...
Gaffer have always been a big problem for rescue workers. Since almost everyone carries a smartphone and can publish and share photos and videos almost immediately, this problem has taken on completely new dimensions in recent years.
As a leading manufacturer of Fire fighting Equipment with more than 60 years of experience, TIPSA is committed to provide first-class products to professionals who risk their lives in the line of duty. TIPSA produces hoses, nozzles and GENFO water back packs for municipal, industrial and forestry brigades.
Individual lightweight evacuation device with 5 mm technora rope. Functions include descent with one or two hands, auto lock, anti-panic braking, smooth horizontal movement, energy absorbers and edge release.
Cribbing blocks and wedges are used to stabilize the object or to support lifting objects during rescue operations. Wedges provide security for victims and rescuers. The blocks can be merged and folded to achieve a larger work surface and lift height, and easily allow for different stabilization structures.
Cribbing blocks and wedges are used to stabilize the object or to support lifting objects during rescue operations. Wedges provide security for victims and rescuers. The blocks can be merged and folded to achieve a larger work surface and lift height, and easily allow for different stabilization structures.
Cribbing blocks and wedges are used to stabilize the object or to support lifting objects during rescue operations. Wedges provide security for victims and rescuers. The blocks can be merged and folded to achieve a larger work surface and lift height, and easily allow for different stabilization structures.
Cribbing blocks and wedges are used to stabilize the object or to support lifting objects during rescue operations. Wedges provide security for victims and rescuers. The blocks can be merged and folded to achieve a larger work surface and lift height, and easily allow for different stabilization structures.
Portable fire extinguisher PII Water 6 liter Crome series is suitable for extinguishing initial fires. It contains water for extinguishing combustible solids.
Portable fire extinguisher PII Foam 6 liter Crome series is suitable for extinguishing initial fires. Contains foam AFFF (for extinguishing combustible solids and flammable liquids). The foam is multi functional and very efficient. It is very suitable for fire fighting in kitchens, fires of grease.
Portable fire extinguisher PII Foam 6 liter Crome series is suitable for extinguishing initial fires. Contains foam AFFF (for extinguishing combustible solids and flammable liquids). The foam is multi functional and very efficient.
The hose bridge Crocodile presents itself as extremely robust and resistant. The standard knobs prevent the hose bridges from falling apart when they are lined up.
53,78 €58,46 €
250 Available from December 2021 / January 2022
Reduced price!
Available from December 2021 / January 2022
According to the current DIN 14927 with multifunction eyelet. All straps are equipped with a high-quality two-pin buckle. The belts are available in two different basic versions and optionally with carabiners with screw protection or twistlock carabiners.
The rescue corset is made from specially coated material. It can therefore be properly wiped clean and disinfected. The smooth surface and the colour-coded belts makes it easier to fit, even under the most difficult of environmental conditions.
High-quality head immobiliser for attaching to spine board, stretcher or basket stretcher. The immobilising blocks have extra-large openings for the patient's ears. All parts can be wiped clean and disinfected.
The suction hoses for firefighting according to DIN EN 14 557, Type A, are smooth inside, black ribbed outside, SBR-quality (styrol-butadien-rubber) without external spiral.
Basket stretchers are used wherever the transport of injured people with conventional means of transport such as stretchers or carrying chairs is problematic. Whether transporting injured people over steep, narrow stairs, on scaffolding and construction sites, in industry, in mining, on ships or in shafts - the basket carrier is always a valuable...
The belt system Spyder Straps is the universal solution for the immobilization of the body on all boards. The cross cucumber can be moved on the central bar.
The Motorola DM4401e is one of the latest mobiles in the Mototrbo catalogue. This new e range mobile promises increased coverage over its predecessor (DM4400), as well as other features including text messaging, work order ticketing and data capabilities to support advanced applications.
Foldable stretchers are made of high quality aluminum and are extremely durable. For storing and carrying, there is also a handy carrying case in the kit.
Foldable stretchers are made of high quality aluminum and are extremely durable. For storing and carrying, there is also a handy carrying case in the kit.
Warning tape STOP GASILCI in the length of 250m. It is made of high quality PE tape 0.10 mm thick. The tape is in red, the inscription STOP GASILCI is in black.
The Unilite ATEX-RA2 Zone 0 intrinsically safe right angle torch is a powerful light that can be operated in areas where hazardous gasses are. With 350 lumens of power, it leads the way in terms of brightness, delivering a strong pin point beam that has a maximum range of 288 meters, which is further assisted by its ultra-smooth reflector.
The FALL SAFE® Swivel Mounted on Ball Bearings (FS33370) is a simple and polyvalent anchor point, that avoids rope twisting if the rope rotates along the axis, made in light alloy alluminium, indespensable for rope acess with a breaking strength of 40kN.
The FALL SAFE® 8-Slot Anchor Plate (FS33352) is a simple and polyvalent multi-anchor point safe system in light alloy alluminium, indespensable for rope acess with a breaking strength of 45kN.
The FALL SAFE® 4-Slot Anchor Plate (FS33351) is a simple and polyvalent multi-anchor point safe system in light alloy hot forged, indespansable for rope acess with a breaking strength of 36kN.
The FALL SAFE® Duetto Pulley (FS33341) is a light, strong and versatile pulley, made of polished alloy, with sheaves mounted on 4 ball bearings and can be used with ropes under 13mm.
The FALL SAFE® Alloy Pulley (FS33405) is a light Pulley with twin sheaves mounted on ball bearings, oscillating side plates and can be used with ropes under 13mm.
The FALL SAFE® Rope Cargo Bag 46L (FS8209) is a heavy duty pvc bag, with an adjustable strap, optimized for rope transport. It has a reinforced opening, carrying handle and has multiple inner compartments and is closed by a pulling string and barrel lock.
The FALL SAFE® Carrying Bag XL (FS8100) is a black and orange textile bag, with front pockets for easier access, multiple openings and adjustable straps.
14,32 €20,45 €
Product available with different options
Reduced price!
Product available with different options
The FALL SAFE® Pro Gloves (FS9306) were designed to improve the user’s performance and make work easier and safer. It was specially adapted to professional workers at height, made with the highest quality material as synthetic leather and stretch nylon fabric with Kevlar palm.
The FALL SAFE® Spider Arachnida (FS243.04) is a chest harness optimized for a upright body position and minimized abdominal fatigue for extended working hours at dificult access, made with high quality polyester, air flow foam for maximum confort and 30MM aluminium buckles.
The FALL SAFE® SPIDER HARNESS COMBO 1 is a specifically designed harness for rope access and rescue in order to cover any work situation in fall protection, work positioning, and restraint. It’s fully adjustable with increased comfort for the most intense work at heights in any hanging direction. Shoulder straps can be totally removed and the harness can...
Lack of space is one of the biggest problems on all emergency vehicles. Most compromises must be made in patients who need special equipment. Small children and babies are such a case, for many applications, there are special items for children, but lack of space, it is usually not possible to carry everything.
The Pro versions of the folding traffic cone are characterised by their increased robustness and heavier weight. This means that they are also suitable for heavily used roads and motorways.
The Titan Crash Ax from Paratech is the new high-end multi-function tool. Lightweight construction, multifunctionality and stability have been implemented uncompromisingly.
In acc. with DIN 14800-12:2004. In Firebox® made by Zarges in acc. with DIN 14880-4-LM (400 x 300 x 150 mm) with aluminium dividers and labelling "Sperrwerkzeug" with individual lettering on request.
Firefighting pressure hose for fire extinguishing and for use in industrial, construction, ... in different colors. The inner part of the rubber makes it even more resistant to wear and prolongs its life.
Firefighting pressure hose for fire extinguishing and for use in industrial, construction, ... The inner part of the rubber makes it even more resistant to wear and prolongs its life.
Firefighting pressure hose for fire extinguishing and for use in industrial, construction, ... The inner part of the rubber makes it even more resistant to wear and prolongs its life.
This is our most popular sledge, and a necessity for almost any trade. Weighing in at 4 kg, this sledge hammer is handcrafted with hot-cast polyurethane and a steel shot-filled canister for maximum dead blow force, sustained impact, and a balanced swing. Official hammer of the Firefighter Combat Challenge - FCC.
Medium High Safety FireFigting Boot for Multipurpose use (Forest, Structural, Urban, etc..). Firefighters boots of a higher quality class with modern design and excellent properties.
Uniformity boot for professional use. Shoes reflected by high quality, durability and wearability. In professional use in police, firefighting and rescue units. A shoe that exceeds our expectations.
Medium High Safety Firefighter Boots for Professional use (Forest, Structural, Urban, etc..). Life warranty for the BOA system. Firefighters boots of a higher quality class with modern design and excellent properties.
Medium High Safety Firefighter Boots for Professional use (Forest, Structural, Urban, etc..). Firefighters boots of a higher quality class with modern design and excellent properties.
High Safety Firefighter Boots for Multi Purpose professional use (Forest, Structural, Urban, etc..). Life warranty for the BOA system. Firefighters boots of a higher quality class with modern design and excellent properties
High Safety Firefighter Boots for Professional use (Forest, Structural, Urban, etc..). Firefighters boots of a higher quality class with modern design and excellent properties.